Square 6.1mm x 6.1mm Round with different diameters: 7.0 / 7.5 / 8.0 / 9.0 / 9.52 / 10.0 Ask about other sizes
For a quick technical answer, include the key operating data and any drawing or photo available.
Square 6.1mm x 6.1mm Round with different diameters: 7.0 / 7.5 / 8.0 / 9.0 / 9.52 / 10.0 Ask about other sizes Straight lengths from 150 mm to 2000 mm; coiling to customer dimensions is available on request.
Square 6.1mm x 6.1mm Round with different diameters: 7.0 / 7.5 / 8.0 / 9.0 / 9.52 / 10.0 Ask about other sizes
Straight lengths from 150 mm to 2000 mm; coiling to customer dimensions is available on request.
Special Thermocouples
Cross-section 2.2 × 4.2 mm. Lengths from 150 mm up to 2 m. Supplied straight or coiled to customer dimensions.
Square section: 6.1 × 6.1 mm. Round diameters: 7.0 / 7.5 / 8.0 / 8.6 / 9.0 / 9.52 mm. Heater installation in the mold is available at additional cost. A 45° × 0.5 mm chamfer is required to prevent damage to the heater.
Classic model in the photo The most classic model is hammer type. It has a Ø4mm tube with a length of 15mm that is placed in an position between the tubular heaters. Its design and form of fastening make it simple to place and remove, while ensuring with the inertia of its mass that the temperature does not fluctuate with the heating ON/OFF cycles. Another cheaper and widely used variant is the Eyelet type thermocouple.
Send dimensions, power, voltage and working conditions. We will review the application.
Contact Grupo Resisten